DIMENSIONAL ART STUDIO

"Do what you love for those who love what you do"

Poinsettia Champlevé Pendant

CAB24588 41F8 4A4F 818F 7AF6F8D19622Glass enamel. Tried it, liked it. Then I moved to other things. 

Trying to think of a cool Christmas thyme project, the thought of colored glass enamel came to mind. Of course! Color is what is needed and missing in my silver work. I use a bit of black silver oxide on many of my pieces for definition. But there is a universe of color available.

The process in this project is called champlevé. I don’t carve the troughs for the color but rather use a lost wax silver casting with the recesses designed into the casting. 

The vitreous enamel pundits say glass enamel can’t be done with Sterling silver (because of the copper) but as can be seen, it’s all just knowing how.

The process is to pickle the silver and create a barrier layer of pure silver on the surface. I may explain the process in some future post. It’s not magic, just a technique.

There is a similar process to champlevé called basse-taille. The difference is basse-taille used transparent enamel so features and designs under the enamel can be seen. That will be on my agenda for some future project.

This is a Christmas season pendant, so I picked a poinsettia blossom as my subject. I found a general outline drawing of a poinsettia so I would get the shape correct. It was not in a useable format for designing a Champlevé but got me started in my own design.

The pendant was created in Vectric Aspire (V10) as I am very comfortable with designing with this software.

Since Aspire can output .stl files, after I completed the design, I used one of my 3D printers to create a plastic prototype. The real output was to a g-code file for my Taig CNC mill.

I have one of my Taig mills dedicated to carving wax. I modified this mill by adding a 20.000 rpm water cooled spindle and a fourth axis (A) for rotary milling projects. (jewelry rings).

I machined two wax masters of the poinsettia pendant design and cast them in sterling silver using the lost wax casting method.

The resultant casting was cleaned and prepped for the champlevé process. Four firings (layers) were required to fill the recesses. 

After the enameling was complete, the silver was again brought up to a full mirror like finish, through several stages of polishing. 

Last step was the addition of the bails.

I think they look quite good and now I am planning to make a few more duplicates, then move on to other glass enameling projects.

93DC58C3 44B6 43D5 A141 A74D42DC66CF F33FA24C C05F 40B5 AE33 2995E097E3F9
 Lost wax casting poinsettiamaster models in flask.  3D printed poinsettia pendant prototype.
7C1ABD67 43E8 4C1F 849D ED1FCAFDF860 54CD54A7 6C78 469B B0F3 26721AAAE45C
 The basic How-To for glass enameling  My sampler kit of Thompson glass enamels.
499AAF41 E716 4493 878C 5F277E04F3BA 9FA8EAC4 E7CA 4DCC AE88 3612AA64EF61
 First layer before first firing.  After two layers have been fired.
2AE92091 6B01 4B5C 9C0C 88869A539E0A C11AA6E8 DA0C 4AE6 B0E2 FCB2793893F4

 Back and front of the poinsettia pendant.

Makers mark and .925 Sterling silver stamp on back

 Finished poinsettia pendants.

 

First Enamel

DSC06570 DSC06568

These are my first attempts at glass enameling on Sterling Silver. I think they came out well and I am excited to do much more of this work. My efforts should only get better with practice.

These are not the only pieces. I made at least 10 of the skating Pegasus and three of the Rose Hearts. 

Like lost wax casting there is no certainty on how each piece will come out of the heat. Temperatures for firing the glass are 1450 F. Success rate is very high but there is always that chance of the unexpected.

Glass Enamel

Cloisonneming

I am considering a slightly new direction with my metal working / art adventures. I would like to add some color to my work. Silver with some occasional black tarnish doesn’t add much excitement to silver jewelry. I could start to add colored gems. That would be a major next step.

There is another option I have been mentally exploring called glass enameling. First thought might be the kind of paint that comes out of a rattle can (spray can) made by a brand name, Rust-Oleum. Nope, not that kind.

The enameling I am considering is fusing glass particles to a metal substrate with the use of high heat. Hot enough, 1450 degrees, to melt the colored glass and fuse it to the metal. It’s been done for centuries and one of the best known processes are from France called Cloisonné and Champlevé. Another process called Basse-taille offers a similar result but uses only translucent enamels to show the features of the metal underneath the coating.

It was also a practice in China and other countries in the far east. The example shown above is from the Ming Dynasty. Examples can also be found in Europe, the near east and many other world cultures.

All processes fuse colored glass enamel into cells created in the base metal. The cells are created with metal wire frames in the Cloisonné method and by carved or formed recesses with the Champlevé. There are many variations as in any type of art.

The results can be very stunning and beautiful. It is a creative process with a lot of controlled heating required. Just the kind of challenge to keep it rare and collectable.

There is an alternative chemical epoxy cold process method that can be used to create a similar look, but I think the old school firing is my preference. It’s the heat of the fire that attracts me to lost wax casting… and to this glass enameling process.

I have a little project I am going to try. If it works out the way I imagine, I’ll certainly exhibit the results and it may be the start of a unique product line of glass enameling.

Search

BACK   |  TOP   |   HOME

Copyright © TEDatum Publishing - All Rights Reserved.