I have a new passion that is growing out of my desire to be creating something very unique and artful. It is the making of small bells from silver, brass, bronze, bell metal, whatever works. My desire is to highly detail the bell as well as the decorative handle or top part. There are almost unlimited possibilities. I will be using lost wax as well as machining on my Taig Micro CNC mill and lathe.

The largest bell that I will be able to run on my Taig mill will be two inches in diameter at the wide end.  That limitation is created because of the depth that I am able to go inside the bell. I have to allow room between the mill bed and the spindle face for how I hold the bell and the length of the milling bit so I can clear the end of the wax cylinder before I start the internal milling. I have only four inches between the spindle nut and the face of the bottom chuck mounted on the table. Half that distance is the total height of the bell if I have to use an up to two inch long mill.

The fact is that I will be making bells of smaller diameter depending on the ratio of bell diameter and bell height. So with a two inch diameter bell the ration is 1:1 (d:h).  That will make a 1:2 ration bell a maximum diameter of one inch. I am thinking most standard looking designs will fall between those two ratios. But then I am not going to limit myself to any standard design. The only limit is that it has to fit on the machine.

There is one other design limitation and that is the wax master has to fit inside one of my casting flasks with enough room for the required investment thickness. There are many sizes of flasks available so it is not a critical design concern with the size masters I can make on the Taig mill.

I am planning for the top part of the bell to be a screw on assembly. That will give me absolute freedom to design whatever I want to finish off the top. The bell bottom becomes the support or base for whatever I design for the handle. That is another whole design area to explore.

The screw on handle also provides a way to design the clapper hanger inside the bell. That can be a machined part like a loop with screw threads. The hole drilled in the top of the bell can be smooth or threaded. I see the design coming together! The clapper can be a turned or a cast part.

I do need to start a design book with graph paper so I can sketch ideas to scale. When I have something I like then I can take it to the CAD and make the actual working drawings. In a few weeks I plan to have an example to show here. This category is sure to grow!

I am referring to lost wax casting in Silver.

It hasn't been a year yet but it is getting close. That’s when my adult daughter and I decided to take a course on wax carving and lost wax casting. We picked the training because it is something I have dreamed of doing for many years. What a joy to take the class together.

After that exposure I knew this was something I could really enjoy with my present health, keeping my hands and mind busy and being able to work while sitting down, for the most part. I decided and vowed to acquire all the tools to do the job at home.

I love hand tools and the detail work, and we bought what we needed to start the class. But now I also needed a few big items to do it all myself.

The first was the kiln that had to go to at least 1400 degrees. Of course I studied everything available. That’s part of the enjoyment, the education process. The Paragon (brand) kiln I bought will easily go to well over 2000 degrees. That gives me enough heat to try other high temperature crafts. This was the biggest expense. I think I invested well.

Next was the casting machine. Initially I was going to go centrifugal casting. I may still go there. But I definitely need a vacuum pump and chamber to degas the investment. There are some alternatives to vacuum degassing, but vacuum is the de facto standard. Plus it works with the vacuum assist casting process.

Centrifugal casting has been put on hold for now and my first good cast proves vacuum works. Of course I need a lot more good casts under my belt. I see clearly that centrifugal is the best choice for small lightweight and intricate casting. It is on my eventual want list. With centrifugal, the force is with me or at least works for me.

The last big hurtle was the comfortable place to do the many hours of wax carving. Since I brought it inside out of the Texas outdoor climate I am like a pig in a mud puddle, totally immersed in what I am doing and loving every minute of it.

Right now I am still refining my skills at wax carving. I will be exploring deeper in to CNC carving as my fingers start to misbehave. But I will take what I can get from my hands for as long as I can.

All the other investment in tools and material has come in small increments over the last 10 or so months. This first successful casting has a lot of time, effort and cost behind it. But all that will be amortized over a whole lot more production. It really isn’t the cost per item that I think about. It is all about the doing.

It demonstrates why handmade art does not and will not compete with mass production as far as cost per piece. The price of silver is only one factor in a long list of total value. Just knowing the person who has made an item adds tremendously to the intrinsic value. Owning something made by a factory assembly line is not the same fuzzy personal feeling as something produced by an artist, craftsperson or personal friend. For me as I have written elsewhere, I think what I make for family and friends provides an heirloom that includes a bit of spirit of the creator, me.

I have just been doing a little wax work at my new, comfortable (air conditioned) wax work bench. I don’t think I will be calling it just wax “carving” as I am beginning to see what can be done with a little controlled wax melting. I am so pleased to see my knowledge and skills expanding. There is …so much to do and try.

I have promised myself that this blog will not be the “how to” but will concentrate on the art and the creativity. I will show the tools and the beauty I see in the stages of the work. I see the stages in wax carving as being as much art as the finished piece. Even the tools are a form of art in perhaps their shape and how they are used.

The preliminary sketches are a form of art in my eye. That’s why I show them here. The creative process flows from the mind’s eye, to the sketch or drawing and through the hands to the tools and machines that shape the material to the dimensions of the finished piece.

Like dance and music where the process of performing is the art, the process of creating dimensional art is a form of art that perhaps only the artist privately enjoys. I intend through good photography and electronic media (this blog) to occasionally display things I see while I am working, that look interesting in whatever stage it grabs me and speaks to me. The beauty is in the journey of creation.

The step by step “how to” I will leave to Ramblin Dan’s Workshop or other places where I publish that sort of industrial process detail. In here it will be all about the art. …maybe. Only you can decide if it works for you.

My main supplier of art products, Rio Grande posts a tag line under my name in my product reviews that says, “Life is a journey”. Somehow they seem to know me.

If you have been here before and things look a bit different, I have spent a couple of days tweaking the looks of this blog website. I thought the old one was actually quite attractive. But one thing I didn't like was all the space the Leaf Picture was taking up on the main page. So I decided I should make some changes. I poked that leaf up into the header and made it significantly smaller.

The pages themselves are fairly similar to what they were. There are some color changes and maybe I lost a bit of the "class" of the old pages. I'll probably do a little more tweaking until I get it exactly right. It is kind of like painting a picture. I never know when to stop and say, "It's done!"

The menu is stretched out a bit longer with separation between the blocks that wasn't that way on the original. It's functional but that is what I may play with a little more. Of course change is good so I should probably just look at it for awhile longer...

Most of my thoughts and effort the previous year (2013) have been focused on working in a much smaller scale than large heavy projects to which I have long been involved. I am getting more awkward in lifting and safely carrying things around in my workshop. I am now most comfortable when setting comfortably on my butt and working with my brain, eyes and arm and hand movement.

My days of hands-on heavy construction and contracting are behind me. That’s OK and not a concern. I am proud of what I have accomplished and am ready for new challenge wherever it leads.

I have always been a techno-nerd so now I am into working in the design and machine control arena. I love the micro machining and CNC control. I also like the 3D CAD/CAM draw-it-and-I-can-make-it ability of dimensional art software. I am not into creating pictures for viewing but rather designing three dimensional objects for machining and occasionally rendering those designs into graphic display.

I share my interest and projects by publishing them here in Dimensional Art Studio. the .org in the URL meaning organization. The definition of an organization is a non-commercial association. I have another URL also linking here which is KautzCraft.com.  The com of course is indicating a commercial intent.

When my creations are good enough and abundant I will advertise their availability for purchase.

My resolution is to not keep my “dimensional” art as a personal collection. My plan until I become more skilled and productive is to perhaps give some away as gifts.  Eventually I would like to become skilled enough that sales will keep me in supplies, and busy in mind and body making more. My second life as an artist will continue to be as good as my first one.